3M Endorsed Installer · 10-year warranty on Prestige Exterior0910 747 555 · Mon–Fri 8:30–17:00 · m2s@m2s.sk
3M™ Prestigeinstalled by M2 Solutions

Glossary

Film data sheets are full of abbreviations. Here is what they mean and which ones really matter when choosing.

Two numbers for your type of glass decide the choice of solar film: VLT, how much light gets through, and TSER, how much solar energy the window rejects. An infrared figure on its own tells you little about the result.

VLT (visible light transmission)
The share of visible light that passes through glass with film. A higher number means a brighter room.
TSER (total solar energy rejected)
The share of solar energy the filmed glass rejects. It includes UV, visible light and infrared. TSER = 1 − g.
g-value (solar factor, SHGC)
The share of solar energy that enters the room, directly and as heat absorbed by the glass. Lower means less overheating.
U-value
Thermal transmittance in W/m²K: how much heat escapes through the window for a given temperature difference. Prestige barely changes it.
Infrared (IR)
The invisible part of the solar spectrum from about 780 to 2,500 nm. It carries about 53% of solar energy.
Ultraviolet (UV)
About 3% of solar energy, yet responsible for up to 40% of fading.
Visible light reflection
The share of light the glass reflects. High reflection means a mirrored look. Stated separately for outside and inside.
Glare reduction
By how many per cent the transmitted light falls compared with bare glass.
Spectral selectivity
The ability to pass visible light while rejecting heat. It is measured by the light-to-solar-gain ratio.
LSG (light to solar gain)
VLT divided by the g-value. Above 1 means the glass passes more light than heat. Clear double glazing has 1.1; with Prestige 70 Exterior, 1.6.
Thermal stress
Stress in glass caused by uneven heating. It is the most common cause of glass breakage without impact.
Low-e glass
Glass with a thin coating that reduces heat loss. It also changes how film behaves, so the 3M tables do not apply to it.
Glass check (3M Glass Check)
An assessment of whether a given combination of glass, frame, shading and film would cause excessive thermal stress. It is a warranty condition.
EN 410
The European standard for the luminous and solar characteristics of glazing. The values on this site follow it.
NFRC
The US organisation and method for rating windows. Its values usually differ from EN 410 by 1 to 2 percentage points.
3M Endorsed Installer
An installation company whose installers have been trained and tested by 3M.

See the values for every film

Send us your window sizes and get a price as soon as possible

Glass area, window type and a few phone photos are enough. The site survey and the quote are free and non-binding.

3M Endorsed Installer logo
3M Endorsed InstallerInstallers trained and tested directly by 3M. 10-year warranty on Prestige Exterior.